Neoseeker.com Forum Thread: Neoseeker's Thermaltake Level 10 GT Review - page 1

reprinted from http://www.neoseeker.com/forums/
original thread: http://www.neoseeker.com/forums/17/t1642124-neoseekers-thermaltake-level-10-gt-review/


Author:   leochan
Date:   Apr 20, 11 at 1:07am (PST)
Subject:   Neoseeker's Thermaltake Level 10 GT Review
-------------------------------------------
Like the Thermaltake Level 10 but couldn't justify its astronomical pricing for a case? Thermaltake hopes to address that with the Level 10 GT, which is actually within reach of enthusiast rig builders. Hit our review to see if Thermaltake still managed to keep a good thing going with the Level 10 GT despite its relatively lower $269 pricing.

[[article:2770]]



Author:   Supernova1332
Date:   Apr 20, 11 at 5:04pm (PST)
Subject:   re: Neoseeker's Thermaltake Level 10 GT Review
-------------------------------------------
The price drop isnt that unexpected, the case does weigh 20lbs less than the original l10.
Was debating between this and the new xigmatek elysium for my next system in a few months. Both fairly expensive and both look great imo. Might grab a dual socket system to put the elysium to use, that is if any come out for bulldozer or sandy/ivy.



Author:   Gravity
Date:   Apr 20, 11 at 9:08pm (PST)
Subject:   re: Neoseeker's Thermaltake Level 10 GT Review
-------------------------------------------
Some of the flavor of the original. Seems ok.
Are the hot bays Sata 2.0 3mbps or 3.0 6mbps? Would it matter?



Author:   Vagabond
Date:   Apr 20, 11 at 9:19pm (PST)
Subject:   re: Neoseeker's Thermaltake Level 10 GT Review
-------------------------------------------
quote Gravity
Some of the flavor of the original. Seems ok.
Are the hot bays Sata 2.0 3mbps or 3.0 6mbps? Would it matter?
They can work with either



Author:   Gravity
Date:   Apr 20, 11 at 9:28pm (PST)
Subject:   re: Neoseeker's Thermaltake Level 10 GT Review
-------------------------------------------
Just noticed the fanage.
Nice, kinda has some effects like the Vegas lights with pattern rotation.
Also convenient.

Maybe though is it possible to note fans included and space available for what's not(like room to add more?) in specs portion?



Author:   Vagabond
Date:   Apr 20, 11 at 9:35pm (PST)
Subject:   re: Neoseeker's Thermaltake Level 10 GT Review
-------------------------------------------
quote Gravity
Just noticed the fanage.
Nice, kinda has some effects like the Vegas lights with pattern rotation.
Also convenient.

Maybe though is it possible to note fans included and space available for what's not(like room to add more?) in specs portion?
Yeah, I could make a section that just talks about the included fans, airflow and customizations that can be made to them.

This case includes four fans. 3 are 200mm and the fourth is 140mm. There is a single 200mm intake fan in front of the HDD bays and another 200mm intake fan on the side door. The two exhaust fans are located at the top and back panels of the case, with the top fan being 200mm and the rear panel fan being 140mm. This setup gives the Level 10 GT a push-pull configuration. All the fan can be removed and new fans can be put in place with varying sizes from 120mm to 200mm. Also, there is room for a 240mm internal rad at top of the case if you remove the top 200mm fan.



Author:   Gravity
Date:   Apr 21, 11 at 12:35am (PST)
Subject:   re: Neoseeker's Thermaltake Level 10 GT Review
-------------------------------------------
quote Vagabond
Yeah, I could make a section that just talks about the included fans, airflow and customizations that can be made to them.

This case includes four fans. 3 are 200mm and the fourth is 140mm. There is a single 200mm intake fan in front of the HDD bays and another 200mm intake fan on the side door. The two exhaust fans are located at the top and back panels of the case, with the top fan being 200mm and the rear panel fan being 140mm. This setup gives the Level 10 GT a push-pull configuration. All the fan can be removed and new fans can be put in place with varying sizes from 120mm to 200mm. Also, there is room for a 240mm internal rad at top of the case if you remove the top 200mm fan.
Are all of the fans LED or which one's are not. That was something that wasn't easily clear to me on the Coolermaster HAF-X. I wound up ordering the fans I did, but aside from the stock black blade ones, there were the same slots for you to install your own led's if you didn't want to spring for new led fans.



Author:   Vagabond
Date:   Apr 21, 11 at 12:38am (PST)
Subject:   re: Neoseeker's Thermaltake Level 10 GT Review
-------------------------------------------
quote Gravity
quote Vagabond
Yeah, I could make a section that just talks about the included fans, airflow and customizations that can be made to them.

This case includes four fans. 3 are 200mm and the fourth is 140mm. There is a single 200mm intake fan in front of the HDD bays and another 200mm intake fan on the side door. The two exhaust fans are located at the top and back panels of the case, with the top fan being 200mm and the rear panel fan being 140mm. This setup gives the Level 10 GT a push-pull configuration. All the fan can be removed and new fans can be put in place with varying sizes from 120mm to 200mm. Also, there is room for a 240mm internal rad at top of the case if you remove the top 200mm fan.
Are all of the fans LED or which one's are not. That was something that wasn't easily clear to me on the Coolermaster HAF-X. I wound up ordering the fans I did, but aside from the stock black blade ones, there were the same slots for you to install your own led's if you didn't want to spring for new led fans.
The three 200mm fans are LED fans and the 140mm fan is not.



Author:   Gravity
Date:   Apr 21, 11 at 12:45am (PST)
Subject:   re: Neoseeker's Thermaltake Level 10 GT Review
-------------------------------------------
Good to know. Thanks. Helps if figuring on a case and the add ons for total cost.


Copyright Neo Era Media, Inc. 1999-2014.
All Rights Reserved.