It took me some 6 hours or so to to find the answer to fix my problem, but it worked. Eaither installing MS Windows XP Service Pack 2 or MS Media Player 10 caused this problem for me. Connecting my Sony DSC-V1 used to cause the MS camera wizard to pop up and picture transfer was easy but after the above mentioned 'upgrades' the camera only showed up as a removable media storage device (drive) and the wizard wouldn't work anymore. I found that for many people, uninstalling Real Player fixed their problem, but if you have tried that or don't have Real Player installed, download and run this file from Microsoft's website. It checks out all the autorun settings and fixes any that may not be properly configuered for autorun to work. (Also make sure you've tried configuering the autorun to actually perform the action you want in the device properties first).
If the link changes, just go to microsoft's drivers download page and in the search box type 'autoplay' which should lead you to a file called AutoFix.exe DL this file and run it following the instructions. Magic!
Yes, I'm in shock Microsoft actually did something right even though it was to fix something they did wrong. Anyway, good luck! If this helped you please let me know! I'd like to think 6 hours of time did more good than to just myself.
Thread Recap (last 10 posts from newest to oldest)
Aug 08, 12 at 4:19pm
It does not work for me since Sony Memory Stick is marked as drive (F:) and shows up only when camera is on and the computer or the wizard does not list drive F... Only drives A,C,D,E are displayed in MS Autoplay repair wizard. So no use for me, but thanks for trying.
Jun 17, 12 at 11:27pm
Thanks a lot for sharing this information with us all, it has really helped me that's for sure.
Mar 10, 12 at 10:34am
Well done, "mccarlson". Thanks so much for this fix. You tried for 6 hours, I tried for almost 6 days!!! But the outcome is perfect. Les A.
Sep 23, 11 at 2:27pm
b;lah blah blah
yeah i ran into some trubles to with the pro gram but its not the same att all now it only pops up when i plug in my i phone and not when i want to up load from my cam sony siber shoot it sucks im tryen to find a fix or ill re down load it to my computter un sure as of yet wht im going to do i know one thing i need it fixed i had this asos re built its a hp with a asus mother board had more ram put in and i just got windows xp pro in stalled and just got it back up and running four days latter and a lote of time att my friends house i love it its running way better but i find this out to day and also its haven a hard time act cessen my web cam from face book ect
Apr 29, 11 at 10:33pm
I am a computer dummy and really afraid to mess with my registry. I've read that some registry cleaners can mess up your computer so I'm a little afraid of them also. Is there an easy fix for this or a safe program that a dummy can use? I would really like to have that camera wizard back.
So far I have removed the realplayer and that didn't help.
If anyone has the patience to show me step by step what to do I would really appreciate it.
MY COMPUTER INFORMATION
Windows XP Media Center Edition Version 2002 Service pack 3 Dell Dimension DM051 Intel(R) Pentium(R) 4CPU 3.00GHz 2.99 GHz 504 MB of RAM Physical address extension Dimension E510 Avira Antivir Personal (free) SuperAntiSpyware Spyware Blaster Malwarebytes Anti-malware
Mar 31, 11 at 1:21pm
Thanks for the link, got me back to auto run, it was bugging the heck out of me. Also found a couple of malware viruses when deleting other programs:)
Aug 23, 10 at 8:20am
THANK YOU!!! A bloody legend! This problem had been driving me MAD! Now is fixed! A gadzillion thanks....no...not you Mr Gates!!!
Aug 04, 10 at 3:09am
Thanks for a lot of usual tips, but none of them worked for me. I have Win XP SP3 and Canon 20D. All worked fine even few weeks after installing and using HP 1610 all in one scanner. But now neither the camera or the scanner are shown in Explorer and are not detected by any imaging software or wiaacmgr.exe. Even adding device in scanners and cameras does not start.
I tried registry entries, registry cleaning, WIA service restarting, reinstalling many version of all drivers including USB and even setting camera to PTP mode. The hardware is detected and installed, but cannot be used.
Thanks for any more tips.
Feb 11, 10 at 1:53am
Thanks to psyber who posted earlier (like years ago!) regarding changing Sony DSC-T1 camera setting to P2P rather than Normal. I tried every fix in here (registry clean, revised settings, autofix, uninstalling real player which had been on my machine since purchasing the PC, etc.)
Of course, I've used Normal setting for five years and can't explain why it suddenly it stopped working but changing the setting to P2P did the trick.
For sony camera owners, go to menu button on camera, and then Setup program and then down arrow to Setup 2 menu. Right arrow over to USB Connect and change to P2P.
This doesn't bring up the same window as before, but it does detect Sony Digital Still Camera as being connected and I can select Picasa 3 to copy the pictures so hey....hope it work
Feb 08, 10 at 8:21pm
Once you've uninstalled Real Player, it leaves loads of random registry entries so didn't work for me. So then used Ace Utilities cleaner and it sorted it. System tray recognised camera as a hardware item and the scanner and camera wizard was populated agian, whereas before this I had no hardware icon and nothing as an option under pictures.
Powered by neoforums v1.6.5b (aperture) Copyright Neo Era Media, Inc. 1999-2013