To adjust the V3 Racing Wheel 2's sensitivity follow the instructions below. ( 3 preset sensitivity selections )
1. Press and hold the SET button for about 1 second to enter the "FUNCTION SETUP MODE", the MODE LED indicator will start blinking and two "beeps" will be heard. 2. Press the direction on the digital/analog directional pad and SELECT button that corresponds to the setting you desire. Directional pad UP and SELECT will give you high sensitivity. Directional pad LEFT/RIGHT and SELECT will give you medium sensitivity. Directional pad DOWN and SELECT will give you low sensitivity. 3. After selecting one of the above sensitivity options you will hear 2 "beeps" letting you know that the wheel has been programmed. For Customizable Sensitivity follow the directions below.
1. Press and hold the SET button for about 1 second to enter the "FUNCTION SETUP MODE", the MODE LED indicator will start blinking and two "beeps" will be heard. 2. Rotate (either left or right with the wheel ) and then hold the wheel to the specific angle desired. 3. Press the SET button again, two "beeps" will sound to indicate the completion of the setting
To reset the the V3 Racing Wheel 2 to it's factory default settings press and hold START, L1 and L2 buttons in until you here two "beeps". To change between Digital and Analog modes follow the directions below.
1. Press and hold the SET button for about 1 second to enter the "FUNCTION SETUP MODE", the MODE LED indicator will start blinking and two "beeps" will be heard.
2. Press the SQUARE and SELECT buttons to set the wheel to DIGITAL, or the O and SELECT buttons for ANALOG. Two beeps will sound and the MODE LED will stop blinking letting you know that the mode has been selected. By default GRAN TURISMO 3 A-SPEC uses the X and Square button for gas and brake. To reassign these functions to the pedals on your racing wheel:
1. Go to the options menu in Gran Turismo. 2. Select key configuration. (The picture of the Game Pad.) 3. Scroll down to Acceleration 4. Press Right on the D-pad (11x) until Analog Up is selected for the Right Analog Stick 5. Now go down to Brakes 6. Press Right on the D-pad (10x) until Analog Down is selected for the Right Analog Stick. 7. Press the X Button to confirm your changes and then press the Triangle button to return to the main menu 8. The gas and brake functions for the game will now be set to pedals on your wheel.
Thread Recap (last 10 posts from newest to oldest)
hey do u know how to get a v3 interact to work on a ps2 i cant figure it out
Try resetting it to factory settings that is what we did and now it works great.
Nov 21, 11 at 11:03pm
poptop22
I want to thank killa007 for this information it was a great help to me. I just received my V3 Racing Wheel today and it had no instructions with it and to find this site and his post was a god send. Thank you again killa007 my fiancee is a happy man now.
Apr 22, 10 at 2:49am
78 racer
Killa007 please help me!!!!!!!!
Apr 22, 10 at 2:41am
78 racer
Ok i have tried for hours and my steering wheel is still stuck on analog, and i need to get it to digital. Im have a ps2, and bought this steering wheel for it to work. CAN SOMEONE PLEASE HELP ME!!!!!:
May 20, 07 at 5:04am
yasser159
thank you so much man! very helpful instructions!
Mar 30, 07 at 11:03pm
GBsDarkAngel
Thanks for the instructions. I haven't played with my V3 racing wheel in years. I couldn't find the instructions and wasn't going to try searching through piles of user manuals to do so. It's been a great help. THANK YOU!!!!
Jan 07, 07 at 7:47pm
skaterbooy
hey do u know how to get a v3 interact to work on a ps2 i cant figure it out
Jan 06, 07 at 3:45pm
NOICE
ive been searching for hours. my daughter dusted this off and wanted to use it and we couldnt figure out how to adjust the steering. makes a big diff.
THANKS!!
Dec 23, 06 at 5:34pm
PearlwhiteZ28
Here is a site with some instructions and what appears to be drivers for PC - it is a German site but the english instructions are there. Probably not as easy to read as the typed ones here, but you get some pictures.
OK, i have a problem. whenever i use this wheel, it doesn't respond and when i hit the start button, it makes 3 beeps and flashes the vibration and analog button. does anyone know what the heck is up with it?
Powered by neoforums v1.6.5b (aperture) Copyright Neo Era Media, Inc. 1999-2013
