Thread Recap (last 10 posts from newest to oldest)
Mar 3, 13 at 9:23am
Greetings, I have 2 ASUS GTX 560 TI cards connected SLI Both DVI ports on the top card are connected to 2 displays, one display is an ASUS 27" monitor, the other display is a 40" Toshiba LCD TV, both connected to HDMI input. other stuff: ASUS M5A99FXPRO 2.0 MB 16GB DDR3 Memory AMD FX 8350 8-core 4GB CPU Win 7 Ultimate 64 bit
I have a unique physical display setup, I use the ASUS monitor for 90% of pc activities at the pc desk, the 40" LCD is only used by the pc for online racing. [Nascar Racing Season 2003] The 40' is mounted on a homemade racing seat/cockpit, it is on a swivel so when racing, it faces the wheel,,, when not racing, it faces the room for TV viewing. So far so good. all works. I set the display to duplicate [clone] , that makes each monitor self supporting, so I can just leave pc desk crawl into cockpit, and start race and Teamspeak from the cockpit, and if there is a hiccup, restart the pc without leaving cockpit. However,,,,,, it seems setting display to Duplicate, causes a hit on FPS for the end result. Not such a big deal,,,, FPS is still 50 to 120 in NASCAR,,,, according to bench testing. But if not set on 'Duplicate' ,,,,I need to have a view of both monitors for rebooting, starting programs,,,,, I tried once a while back to just power off the 27 ASUS, but I recall when I did that, the 40" picked up an occasional flicker,,,,,, if I disconnect the DVI/HDMI cable to 27',, then no flicker, but not real handy,,,,,,,,,,,,,,,,,, my son said to move the 27' monitor so I could see it from cockpit, and set display to extend,,,, with that setting,, FPS increases about 10 FPS,,,,, any other ideas?
Powered by neoforums v2.3.9b (Bolieve) Copyright Neo Era Media, Inc. 1999-2016