review Corsair Vengeance Quad-Channel Memory Review

I have been running some benches although I have Patriot memory from 1333 through to 2000mhz.1333@6,6,6,18 T1 2:6 , 1600@8,8,8,24 T1 2:8 and 2000@9,9,9,27 2:10 I used 3DMark11 for exanple I5 750@ 4500mgz and 5850 in crossfire on a ASUS Sabertooth55i 1333 I get P9506, 1600 P9505 , and 2000 P9393 . It seems to me the lowest memory Ratio with the lowest timing at the highest speeds like 1:3 with a high BCLK is the faster memory set up. My Sabertooth will only run 220 BCLK max. I think that is why the best memory and the most expencive is the PC12800(1600mhz) CAS 6 memory or even the PC16000(2000mhz) CAS 6 has a cost of $500-$600 for 8GB. I have seen only a EVGA board run a BCLK of 253 everyone else seems limited to 225 or lower but it seems the lowest CAS is the way to go. The new sandy bridge i7 2600 if you are lucky you may get 106 BCLK. The new 2011 have a choice of BCLK of 100,133,166,200 and 250 bedending on what board and if you noticed they have 2 cores turned off. They are 8 core cpu's under cover. The eight cores are out in March to Im waiting for my X CPU untill then. I can run anything now at over 100fps EVGA GTX570 Classified@ 963/2000 in SLI and it beats the 580's@797/2200 and I run everythig with max settings 8XAA ,16AF and HBOA on and I get around 160-180 BFBC2 with a i5. My 2011 is already to go just need a CPU antec GF-85 MSI BigBang , three radiators first 3X120 3 core , second 2X120 dual core and on top 2X140 triple core and everything is water cooled(distilled+antibiotic/fungal) two pumps both swiftech a 600 and a 655. Two optical drives DVD-RW and BR-RW with PC Power and Cooling Silencer 950MKII certified@115 amps 1380Watts single rail and 2X4GB @6,6,6,18@1600mhz@1.6volts.