MSI 875P Neo-FIS2R

MSI 875P Neo-FIS2R

84

Based on 3 reviews

  • Good
    2
  • Average
    1
  • Bad
    0
90

Users Score Review This

  • Good
    3
  • Average
    0
  • Bad
    0

MSI 875P Neo-FIS2R User ReviewsPC

10

Pentium 4c 2.4GHz 800MHz FSB OC @ 3.3GHz 1.1GHz FSB

The good:

Bios 1.7 GOOD!

The bad:

Bios 1.8 Bad?

Summary:

I have a Pentium 4c 2.4GHz 800MHz FSB (SL6Z3)(M0) Core stepping (OF25h) CPUID String, On my NEO can get speeds of 275MHz FSB on this board stable! On stock AIR @3.3GHz core & 1.1GHz FSB FAST!!

- ANTEC 480W
ATX 12V TrueBlue 480 Power
- Antec PlusView1000AMG Case
Metallic Gray SOHO With 5 80mm Antec Blue Led Fan's
- MSI GFX FX5900U-VTD256
256MB Ultra VIVO DDR DVI TV-Out (OC@ 475MHz/900MHz)
- KINGSTON HyperX Dual Kit PC3500 (OC@ 450MHz/900MHz)

9.0

Good/Bad

The good:

Nice board runs fast very few problems

The bad:

anything over bios 1.4 over clocks prossor by about 50 mhz

Summary:

Its a good board better if i could get a response from msi and some feed back to fix this promlem board runs on heat wise new core center removes reading of MB temp that a little weird ********* ********* *** ****** ****** ************** ********** ******* *****

8.0

875p bad start ...end good all good

The good:

runs stable, in fast mode
(ultra)-turbo not tested yet)

The bad:

corecell not in bios, and under XP unstable
bios flash v1.6 solves Temperature readout!

Summary:

using speedfan to control the CPU fan
3dmark03 5922
3dmark2001 16874

3GHz P4
202 MHz FSB
Fast mode
Corsair XMS3500 dual 1024MB timing by spd 2.5-3-3-8-8
DDR volt 2.5V CPU Core 1.55V
HT enabled
mirror RAID on promise controller

(0.0550/d/www1)