XFX Radeon HD 6950 XXX Edition Review - PAGE 14

One of the issues that all modern graphics architectures face is the need for computational efficiency. XFX Radeon HD 6950 graphics card has been a great upgrade over my old 5770. Flash it to a 6970 for even better bang for the buck

What is the software used for overclocking?
How do I get this software?

Thank you!

quote Luciano_Comp

What is the software used for overclocking?
How do I get this software?

Thank you!

I used MSI Afterburner. Here is a link http://event.msi.com/vga/afterburner/download.htm

quote Vagabond

quote Luciano_Comp

What is the software used for overclocking?
How do I get this software?

Thank you!

I used MSI Afterburner. Here is a link http://event.msi.com/vga/afterburner/download.htm

Thank you!!!

Downloaded current and Beta versions of Afterburner and could NOT get past 840/1325 clocks. Could change voltage. Read about changing the cfg file but could NOT "save" changes.

How were you able to get it to change the clocks??

quote USAdystopia

Downloaded current and Beta versions of Afterburner and could NOT get past 840/1325 clocks. Could change voltage. Read about changing the cfg file but could NOT "save" changes.

How were you able to get it to change the clocks??

Try this


1st - Remove the current version and download the latest MSI AfterBurner and install.
2nd - Locate the folder where MSI Afterburner installed to, open it, and locate the CFG file named MSIAfterburner. When you 1st double click this file it will ask you what program you want to use to open it, choose "Notepad" and click "ok" Once you have the MSIAfterburner CFG file open in notepad you need to change a couple of settings near the bottom:

UnofficialOverclockingEULA = I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode = 1 (to keep PowerPlay active (may not work on old ASICs), 2 to traditionally disable PowerPlay or to 0 to temporary disable unofficial overclocking path)<--Do not type this, just for reference I have mine set to = 1

After you have made these changes, DO NOT forget to click "file" and "save" before exiting notepad, or your changes will not take into effect!

When I "Save" a message window titled "Confirm Save As" tells me that MSIAfterburner.cfg already exists and asks if I want to replace it...I save it a notepad message box indicates "Access Denied"...

Should the MSIAfterburner file be named something else?

quote USAdystopia

When I "Save" a message window titled "Confirm Save As" tells me that MSIAfterburner.cfg already exists and asks if I want to replace it...I save it a notepad message box indicates "Access Denied"...

Should the MSIAfterburner file be named something else?

You are going to need to change the permissions for the file. To do this right click on the MSI Afterburner CFG file and select proprieties. After this go to the securities tab and select advanced. Then set the permission to full control. After that you should be able to change the file.

Thanks very much for your help! Got it working.

quote USAdystopia

Thanks very much for your help! Got it working.

Great. Glad it worked.

Let us know how high your clock speeds scale to

Have been slowly increasing the clocks to 860/1350. Disabled Graphic Overdrive on AMD's CCC. Any guidelines on the core voltage...seems to crash to blue screen when enabled even at 900-1100mV. Can't seem to find the default voltage online. GPU-Z shows 898mV.